VTube-LASER-Compatible HEXAGON Scanners and Arms

From ATTWiki
Revision as of 14:13, 9 September 2022 by Mcone (Talk | contribs)

Jump to: navigation, search

HEXAGON Arms and Scanners that Are Compatible with VTube-LASER



HEXAGON AS1 Scanner.png


See also VTube-LASER ROMER RDS Performance Recommendations


HEXAGON Arms

Arm Type Image
ROMER Arm Version 7 Series
7-axis laser scanner
ROMER7.png
HEXAGON Arm Version RA8 Series
7-axis laser scanner
RA8.png
ROMER Arm Version 7 Series
6-axis ball probe
ROMER7-SixAxis.jpg
HEXAGON Arm Version RA8 Series
6-axis ball probe
RA8-SixAxis.png



HEXAGON Scanner Support

VTube-LASER can support any scanner supported by RDS directly, including...


Scanner Description Image
The AS1 scanner is for the RA8 7-axis arms. It is the upgraded version of the RS6. It is very good for parts that are highly reflective or change reflectivity on different parts of the surface. The SHINE technology takes three different exposures of each laser stripe in order to properly take in data from surfaces that have different reflectivity along the stripe. HEXAGON AS1 Scanner.png
The RS6 scanner is for the RA8 7-axis arms. It is very good for parts that are highly reflective or change reflectivity on different parts of the surface. The SHINE technology takes three different exposures of each laser stripe in order to properly take in data from surfaces that have different reflectivity along the stripe. HEXAGON RS6 Scanner.png
This is for RA8 7-axis Portable Arms. It is best for parts that have consistent surface reflectivity properties along the entire part because the camera chooses a single exposure for each stripe. HEXAGON RS5 Scanner.png
RA7 7-axis Portable Arm Scanners ROMER Scanner Plus Hex Logo.png
CMS108 Scanners ROMER CMSScanner.png
HP-L-20.8

HP-L-20.8.png
RA7 and RA8 Portable Arms with HP-L-8.9 scanners

This scanner is for attachment of a scanner on the same arms that use Tube Shaper software. See the ROMER HP-L-8.9 website

  • For use on 6 axis arms.
ROMER HPLScanner.png
* Leica Absolute Scanner for Long Distances
  • The LR model can measure a 10 meter volume.
  • The MR model can measure a 20 meter volume.
  • YouTube video of LAS
LeicaLAS.png

HEXAGON Arm Ball Probe Support

All ball probe systems on devices that run through RDS are compatible with VTube-LASER.



Other Pages