Difference between revisions of "Using a Datum to Get Print Dimensions"

From ATTWiki
Jump to: navigation, search
(Datum Reports)
(Datum Reports)
Line 61: Line 61:
 
</td>
 
</td>
 
<td>
 
<td>
[[image:datumreport1.png|400px]]
+
[[image:datumreporttemplate.png|500px]]
 +
[[image:datumreport1.png|500px]]<br>
 +
[[image:datumreport2.png|500px]]<br>
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 16:05, 28 March 2018

Vtube-laser logo 1.96.png


Contents

How to Use Datums To Get Print Dimensions

Vtube-laser v2.7 screenshot.png


Sample Print

This is a sample print with the design intent of checking the width and the height. You can use the VTube-LASER DATUM feature to get to these dimensions.

The diameter of this part is 1.25 inches. You will need to find the X centerline dimension by subtracting 1.25 from 5.5. So - the X dimension should be 5.5 - 1.25 = 4.25.

The Y dimension will be 13, since it is already dimensioned the way VTube-LASER will dimension a part.

Sampleprint.png



Set the Datum

It's necessary to set the datum using the Datum tab in the MASTER DATA menu.

It may also be necessary to rotate the master tube into the an orientation that is similar to the print. In this case, we used the Transform feature to rotate the master tube so that the first leg is aligned to the Y axis.

Set the datum.png



Datum Reports

After a measure and alignment, use one of the Datum reports in the report menu to show the dimensions.

In this example, the two X values show the dimensions that correspond to the 5.5 dimension.

Datumreporttemplate.png Datumreport1.png
Datumreport2.png



Other Pages