UNIVERSAL TOOL & ENGINEERING

From ATTWiki
Revision as of 01:37, 24 October 2014 by Mcone (Talk | contribs)

Jump to: navigation, search
Universal Tool & Engineering sells Alpine benders built by CSM in Taiwan and distributed by UTE in the United States. They also manufacture their own UTE brand of bender. The Alpine brand of benders are a popular brand and are gaining in world-share every year, as the benders are high quality at a competitive price.

Utelogo.png
Alpinelogo.png
Alpinebender.png


VTube-STEP Partner

UTE is an active distribution partner for our VTube-STEP software worldwide.

Internationalglobe.jpg

VTube-STEP and VTube-LASER Support for UNISON Benders

VTube-STEP can export Supravision data to UNISON benders.

VTube-STEP also exports special bender data for the UNISON control for bending ribbon shaped stock.

VTube-LASER, the version of VTube that connects to a FARO measuring center arm, can send radius UNISON benders for correction of large radius push bends. The LASER version can also send single bend angles to UNISON benders for large pipe application where correcting the bend angle with the pipe still in the bender.

Unison communications with.jpg
Vtube-laser-sendbendangle.jpg

Contact Information

Unison Ltd
Jim Saynor, Sales Manager
Faroe House,
Thornburgh Road,
Eastfield,
Y011 3UY
Phone: +44 (0) 1723 582868
Fax: +44 (0) 1723 582379
Email: [email protected]

Unison North America
40455 Brickyard Drive
Madera, CA 93636
Phone: (559) 431-4131
Fax: (559) 431-4431
Email: [email protected]

Other Pages