UNISON

From ATTWiki
Revision as of 15:45, 8 March 2013 by Mcone (Talk | contribs)

Jump to: navigation, search
UNISON benders are built in the UK and marketed worldwide. These benders are popular world-wide, as the benders are high in quality and the service is excellent. They are all electric with all actuators servo-controlled.

Unsion logo.jpg
Unsion bender 3drendering.jpg

Contents

Distributor of VTube in UK and Europe

UNISON is an active distribution partner for our VTube software in the UK and Europe.

UNISON Control software

The UNISION Windows software allows for complete programming of bender setup. It includes a bender simulator.

Unision simulator.jpg

VTube-STEP and VTube-LASER Support for UNISON Benders

VTube-STEP can export Supravision data to UNISON benders.

VTube-STEP also exports special bender data for the UNISON control for bending ribbon shaped stock.

VTube-LASER, the version of VTube that connects to a FARO measuring center arm, can send radius UNISON benders for correction of large radius push bends. The LASER version can also send single bend angles to UNISON benders for large pipe application where correcting the bend angle with the pipe still in the bender.

Unison communications with.jpg
Vtube-laser-sendbendangle.jpg

Contact Information

Unison Ltd
Jim Saynor, Sales Manager
Faroe House,
Thornburgh Road,
Eastfield,
Y011 3UY
Phone: +44 (0) 1723 582868
Fax: +44 (0) 1723 582379
Email: [email protected]

Unison North America
40455 Brickyard Drive
Madera, CA 93636
Phone: (559) 431-4131
Fax: (559) 431-4431
Email: [email protected]

Other Pages