TubeCAD Pro v8-20071024

From ATTWiki
Revision as of 15:07, 24 October 2007 by Mcone (Talk | contribs)

Jump to: navigation, search

Tcadpro logo.jpg


Check.jpg FIX for TubeCAD Long Chart

The ROTATIONS in the TubeCAD LONG chart were inserted one row too high. The

Bend 1   Radius                                     +25.00 mm      (        +25 mm)
         Tangent Distance                           +25.07 mm      (        +25 mm)
         Arc Length                                 +39.34 mm      (    +39 1/4 mm)
         Arc Length Adjusted                        +39.34 mm      (    +39 1/4 mm)
         Point 2 to Point 3                         +72.63 mm      (    +72 3/4 mm)
                                                                                   
         Length Between Bends                       +22.62 mm      (    +22 1/2 mm)
        Rotation (+/- 180 Degrees)                  +0.0 deg      (            SP)
                                                                                   
         Point 2 to Point 3                         +72.63 mm      (    +72 3/4 mm)
         Angle of Bend                              +89.9 deg      (               
Bend 2   Radius                                     +25.00 mm      (        +25 mm)
         Tangent Distance                           +24.95 mm      (         +5 mm)
         Arc Length                                 +39.22 mm      (    +39 1/4 mm)
         Arc Length Adjusted                        +39.22 mm      (    +39 1/4 mm)
         Point 3 to Point 4                        +148.20 mm      (   +148 1/4 mm)
                                                                                   
         Length Between Bends                       +98.75 mm      (    +98 3/4 mm)
         Rotation (+/- 180 Degrees)                -149.9 deg      (            CW)
                                                                                  
:
:
:


TubeCAD Long

        Part Number                                TEST PART                      
        Outer Diameter                             +12.70 mm      (    +12 3/4 mm)
                                                                                  
        Offset End One                              +0.00 mm      (          0 mm)
        End to Tangent                             +48.03 mm      (        +48 mm)
                                                                                  
        Point 1 to Point 2                         +73.10 mm      (        +73 mm)
        Angle of Bend                              +90.2 deg      (               

Bend 1 Radius +25.00 mm ( +25 mm)

        Tangent Distance                           +25.07 mm      (        +25 mm)
        Arc Length                                 +39.34 mm      (    +39 1/4 mm)
        Arc Length Adjusted                        +39.34 mm      (    +39 1/4 mm)
        Point 2 to Point 3                         +72.63 mm      (    +72 3/4 mm)
                                                                                  
        Length Between Bends                       +22.62 mm      (    +22 1/2 mm)
        Rotation (+/- 180 Degrees)                  +0.0 deg      (            SP)
                                                                                  
        Point 2 to Point 3                         +72.63 mm      (    +72 3/4 mm)
        Angle of Bend                              +89.9 deg      (               

Bend 2 Radius +25.00 mm ( +25 mm)

        Tangent Distance                           +24.95 mm      (         +5 mm)
        Arc Length                                 +39.22 mm      (    +39 1/4 mm)
        Arc Length Adjusted                        +39.22 mm      (    +39 1/4 mm)
        Point 3 to Point 4                        +148.20 mm      (   +148 1/4 mm)
                                                                                  
        Length Between Bends                       +98.75 mm      (    +98 3/4 mm)
        Rotation (+/- 180 Degrees)                -149.9 deg      (            CW)
                                                                                  
        Point 3 to Point 4                        +148.20 mm      (   +148 1/4 mm)
        Angle of Bend                              +88.8 deg      (               

Bend 3 Radius +25.00 mm ( +25 mm)