TubeCAD Pro v8-20071024

From ATTWiki
Revision as of 15:01, 24 October 2007 by Mcone (Talk | contribs)

Jump to: navigation, search

Tcadpro logo.jpg


Check.jpg FIX for TubeCAD Long Chart

The ROTATIONS in the TubeCAD LONG chart were inserted one row too high. The

TubeCAD Long

        Part Number                                TEST PART                      
        Outer Diameter                             +12.70 mm      (    +12 3/4 mm)
                                                                                  
        Offset End One                              +0.00 mm      (          0 mm)
        End to Tangent                             +48.03 mm      (        +48 mm)
                                                                                  
        Point 1 to Point 2                         +73.10 mm      (        +73 mm)
        Angle of Bend                              +90.2 deg      (               

Bend 1 Radius +25.00 mm ( +25 mm)

        Tangent Distance                           +25.07 mm      (        +25 mm)
        Arc Length                                 +39.34 mm      (    +39 1/4 mm)
        Arc Length Adjusted                        +39.34 mm      (    +39 1/4 mm)
        Point 2 to Point 3                         +72.63 mm      (    +72 3/4 mm)
                                                                                  
        Length Between Bends                       +22.62 mm      (    +22 1/2 mm)
        Rotation (+/- 180 Degrees)                  +0.0 deg      (            SP)
                                                                                  
        Point 2 to Point 3                         +72.63 mm      (    +72 3/4 mm)
        Angle of Bend                              +89.9 deg      (               

Bend 2 Radius +25.00 mm ( +25 mm)

        Tangent Distance                           +24.95 mm      (         +5 mm)
        Arc Length                                 +39.22 mm      (    +39 1/4 mm)
        Arc Length Adjusted                        +39.22 mm      (    +39 1/4 mm)
        Point 3 to Point 4                        +148.20 mm      (   +148 1/4 mm)
                                                                                  
        Length Between Bends                       +98.75 mm      (    +98 3/4 mm)
        Rotation (+/- 180 Degrees)                -149.9 deg      (            CW)
                                                                                  
        Point 3 to Point 4                        +148.20 mm      (   +148 1/4 mm)
        Angle of Bend                              +88.8 deg      (               

Bend 3 Radius +25.00 mm ( +25 mm)


TubeCAD Long
                                                                                   
         Part Number                                TEST PART                      
         Outer Diameter                             +12.70 mm      (    +12 3/4 mm)
                                                                                   
         Offset End One                              +0.00 mm      (          0 mm)
         End to Tangent                             +48.03 mm      (        +48 mm)
                                                                                   
         Point 1 to Point 2                         +73.10 mm      (        +73 mm)
         Angle of Bend                              +90.2 deg      (               
Bend 1   Radius                                     +25.00 mm      (        +25 mm)
         Tangent Distance                           +25.07 mm      (        +25 mm)
         Arc Length                                 +39.34 mm      (    +39 1/4 mm)
         Arc Length Adjusted                        +39.34 mm      (    +39 1/4 mm)
         Point 2 to Point 3                         +72.63 mm      (    +72 3/4 mm)
                                                                                   
         Length Between Bends                       +22.62 mm      (    +22 1/2 mm)
         Rotation (+/- 180 Degrees)                  +0.0 deg      (            SP)
                                                                                   
         Point 2 to Point 3                         +72.63 mm      (    +72 3/4 mm)
         Angle of Bend                              +89.9 deg      (               
Bend 2   Radius                                     +25.00 mm      (        +25 mm)
         Tangent Distance                           +24.95 mm      (         +5 mm)
         Arc Length                                 +39.22 mm      (    +39 1/4 mm)
         Arc Length Adjusted                        +39.22 mm      (    +39 1/4 mm)
         Point 3 to Point 4                        +148.20 mm      (   +148 1/4 mm)
                                                                                   
         Length Between Bends                       +98.75 mm      (    +98 3/4 mm)
         Rotation (+/- 180 Degrees)                -149.9 deg      (            CW)
                                                                                   
         Point 3 to Point 4                        +148.20 mm      (   +148 1/4 mm)
         Angle of Bend                              +88.8 deg      (               
Bend 3   Radius                                     +25.00 mm      (        +25 mm)
:
:
: