TS-2000

From ATTWiki
Revision as of 13:28, 20 March 2013 by Mcone (Talk | contribs)

Jump to: navigation, search
Ts-2000.jpg

Contents


The TS-2000 control is a Windows-based control that was designed by Tom Glissman. TS-2000 controls were initially based on the Windows NT platform. They are now shipped with the Windows XP platform.

Cncpines.jpg


About TS-2000 Measure Center Communications

The TS-2000 software allows for communication using the Supravision SVNET protocol. This is a purchased option for the control (not all TS-2000 controls have this option enabled). Communications are straight-forward, efficient, and very fast.

The TS-2000 can also be setup to communicate with:


How to Check if Communications is Possible

The Supravision link is sold by PINES as an option. It's important to verify that this option is switched on when discovering if a TS-2000 is ready for communication. The main window contains 16 touchscreen buttons starting with XYZ in the upper left. If the upper-right button reads "Supravision Link", then the option is enabled on that TS-2000 control. If the button says "External Link", then communications is not activated.

What Pines Technology will Need to Activate the Communications Feature

Pines Technology will need to send you a setup program to enable communications. They will ask for this information:

  1. Machine Serial Number
  2. Software Version Number

You can find both of these values in the caption of the TS-2000 software. The software version will be a four digit number like 2.8.6.7 or 3.1.0.2.