Surface Spray

From ATTWiki
Revision as of 18:52, 24 February 2017 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg Removable surface sprays are helpful for coating surfaces that are highly reflective or very black. Then can also aid in marking the area to measure.

Vtube-laser 1 73.jpg

Contents


Helling Spray

  • Very thin coating
  • Designed for laser scanning
  • Cleaning with a wipe is easy.
  • Is not as dense as Magnaflux or Dynaflux. Thick coating is not necessary. The goal of the spray is to break the reflectivity - for which a complete covering is not necessary.

Helling spray.png

Foot Spray

  • Inexpensive
  • Does not cause an allergic reaction like the flux types below.
  • Much less messy than alcohol and powder.
  • Cleaning with a wipe is easy.
  • Is not as dense as Magnaflux or Dynaflux. Thick coating is not necessary. The goal of the spray is to break the reflectivity - for which a complete covering is not necessary.
  • Consistent levels of coating, however, is preferred. Magnaflux and Dynaflux (see below) excel in consistency.

Goldbond footspray.jpgTinactin.jpg

Magnaflux

Magnaflux Logo.jpg

Magnaflux Spotcheck SKD-S2 Developer

  • Works well
  • Very expensive compared to Dynaflux ($50 to $75 per can)
  • For applications that require cleaning, the corresponding cleaner is SKC-S
  • May cause an allergic reaction in the skin of some operators

Magnaflux Developer.jpg Magnaflux Cleaner.jpg

Dynaflux

Dynaflux Logo.jpg

Dynaflux DF315-16 Crack Check D-F Developer

  • Works well
  • DF315-16 Flammable Nuclear grade uses non-chlorinated solvent
  • DNF315-16 Non-flammable Standard grade
  • Very inexpensive ($5 per can)
  • For applications that require cleaning, the corresponding cleaner uses the same Dynaflux part number.
  • May cause an allergic reaction in the skin of some operators

Dynaflux Crackcheck.jpg Dynaflux Cleaner.jpg

CerMark LMM6000

Cermark logo.jpg

CerMark LMM6000 Laser Marking Spray

  • This spray is used in additive laser bonding processes.
  • Works well as it is not as messy as foot powder.
  • Drys like paint - but washes off with water.
  • Very expensive ($75 per can)

Cermark spray.jpg

Other Pages