Difference between revisions of "Setup VTube-STEP for the Network License Manager"

From ATTWiki
Jump to: navigation, search
(STEP 2)
(STEP 2)
 
(8 intermediate revisions by one user not shown)
Line 29: Line 29:
 
* Be sure VTube is not running during this setup.
 
* Be sure VTube is not running during this setup.
  
* Find the "vtube local settings.cfg" file on your computer.  In Windows Vista, Windows 7, and Windows 8 the file is located in ''C:\ProgramData\VTube''
+
* Find the '''vtube local settings.cfg''' file on your computer.  In Windows Vista, Windows 7, and Windows 8 the file is located in '''C:\Users\Public\Documents\VTube\config'''
  
 
<br><br>
 
<br><br>
  
 
==Step 3==
 
==Step 3==
Load the cfg file into an editor like Notepad++, Notepad, or Wordpad. Find the [Hardware Key] section:
+
Load '''vtube local settings.cfg''' into an editor like Notepad++, Notepad, or Wordpad.
 +
 
 +
Find the [Hardware Key] section:
  
 
<pre>
 
<pre>

Latest revision as of 14:13, 8 October 2015

Vtube-step logo 1.96.png

Back to VTube-STEP

Use these steps to setup VTube-STEP for use with the Network License Manager software.


Vtube-step-1.87 screenimage.png




STEP 1

Start the NLM software on the server computer. (See Network License Manager for more information.)



STEP 2

  • Install the VTube-STEP software if it is not installed.
  • Be sure VTube is not running during this setup.
  • Find the vtube local settings.cfg file on your computer. In Windows Vista, Windows 7, and Windows 8 the file is located in C:\Users\Public\Documents\VTube\config



Step 3

Load vtube local settings.cfg into an editor like Notepad++, Notepad, or Wordpad.

Find the [Hardware Key] section:

[Hardware Key]
NLM IP Address=127.0.0.1
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Step

Step 4

Change the address to the address of the Network License Manager server IP. Network License Manager can show its IP address. (This entry is an example)

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Step

Step 5

Change the Enable Network value to 1.

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=1
License Type=Step


Step 6

Save and close the cfg file then run VTube.