Difference between revisions of "Setup VTube-STEP for the Network License Manager"

From ATTWiki
Jump to: navigation, search
(Step 3)
Line 10: Line 10:
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>
[[image:Vtube-step_1_6.jpg|300px]]
+
[[image:vtube-step-1.87_screenimage.png|300px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 21:40, 18 March 2015

Vtube-step logo.jpg

Back to VTube-STEP

Use these steps to setup VTube-STEP for use with the Network License Manager software.


Vtube-step-1.87 screenimage.png




STEP 1

Start the NLM software on the server computer. (See Network License Manager for more information.)



STEP 2

  • Install the VTube-STEP software if it is not installed.
  • Be sure VTube is not running during this setup.
  • Find the "vtube local settings.cfg" file on your computer. In Windows Vista, Windows 7, and Windows 8 the file is located in C:\Users\Public\VTube



Step 3

Load the cfg file into an editor like Notepad++, Notepad, or Wordpad. Find the [Hardware Key] section:

[Hardware Key]
NLM IP Address=127.0.0.1
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Step

Step 4

Change the address to the address of the Network License Manager server IP. Network License Manager can show its IP address. (This entry is an example)

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Step

Step 5

Change the Enable Network value to 1.

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=1
License Type=Step


Step 6

Save and close the cfg file then run VTube.