Difference between revisions of "Setup VTube-LASER for the Network License Manager"

From ATTWiki
Jump to: navigation, search
(STEP 2)
(STEP 2)
Line 24: Line 24:
  
 
== STEP 2 ==
 
== STEP 2 ==
Find and load the "vtube local settings.cfg" file into a notepad editor.
+
Edit the "vtube local settings.cfg" file in a notepad editor.
  
 
In Windows Vista, Windows 7, and Windows 8 the file is located in C:\ProgramData\VTube
 
In Windows Vista, Windows 7, and Windows 8 the file is located in C:\ProgramData\VTube

Revision as of 19:12, 19 May 2015

Vtube-laser logo.jpg

Back to VTube-LASER

Use these steps to setup VTube-LASER for use with the Network License Manager software.


Vtube-laser 1.77.3.jpg




STEP 1

Start the NLM software on the server computer. (See Network License Manager for more information.)

STEP 2

Edit the "vtube local settings.cfg" file in a notepad editor.

In Windows Vista, Windows 7, and Windows 8 the file is located in C:\ProgramData\VTube

Step 3

Find the [Hardware Key] section:

[Hardware Key]
NLM IP Address=127.0.0.1
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser

Step 4

Change the address to the address of your server IP. (This entry is an example)

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser


Step 5

Change the Enable Network value to 1.

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=1
License Type=Laser


Step 6

Save and close the cfg file then run VTube.