Difference between revisions of "Setup VTube-LASER for the Network License Manager"

From ATTWiki
Jump to: navigation, search
(STEP 2)
(STEP 2)
Line 25: Line 25:
  
 
== STEP 2 ==
 
== STEP 2 ==
Find and load the "vtube local settings.cfg" file.
+
Find and load the "vtube local settings.cfg" file into a notepad editor.
  
 
In Windows Vista and Windows 7, the path will be:
 
In Windows Vista and Windows 7, the path will be:

Revision as of 18:31, 12 May 2011

Vtube-laser logo.jpg

Back to VTube-LASER

Use these steps to setup VTube-LASER for use with the Network License Manager software.


Vtube-laser screen 1 54.jpg




STEP 1

Start the NLM software on the server computer. (See Network License Manager for more information.)



STEP 2

Find and load the "vtube local settings.cfg" file into a notepad editor.

In Windows Vista and Windows 7, the path will be: c:\ProgramData\VTube

In Windows XP, the path will be: c:\Documents and Settings\All Users\Application Data\Vtube

Step 3

Find the [Hardware Key] section:

[Hardware Key]
NLM IP Address=127.0.0.1
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser

Step 4

Change the address to the address of your server IP. (This entry is an example)

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser


Step 5

Change the Enable Network value to 1.

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=1
License Type=Laser


Step 6

Save and close the cfg file then run VTube.