Difference between revisions of "Setup VTube-LASER for the Network License Manager"

From ATTWiki
Jump to: navigation, search
(STEP 2)
(STEP 2)
Line 34: Line 34:
  
 
<br><br>
 
<br><br>
 +
(Note: Versions earlier than 1.64c use a different set of folders based on the user name.)
  
 
==Step 3==
 
==Step 3==

Revision as of 18:24, 12 May 2011

Vtube-laser logo.jpg

Back to VTube-LASER

Use these steps to setup VTube-LASER for use with the Network License Manager software.


Vtube-laser screen 1 54.jpg




STEP 1

Start the NLM software on the server computer. (See Network License Manager for more information.)



STEP 2

Install the VTube-STEP software. Find the "vtube local settings.cfg" file on your computer:

In Windows 7 the file will be located in the "c:\ProgramData\VTube" folder.

By default AppData is a hidden folder. You can use Control Panel / Folders command to change this to show all folders. The <UserName> is the login name being used to login to Windows.

In Windows XP, this file will be stored in "C:\Documents and Settings\All Users\Application Data\VTube"



(Note: Versions earlier than 1.64c use a different set of folders based on the user name.)

Step 3

Do not run VTube during the following steps:

Load the cfg file into an editor like Notepad or Wordpad. Find the [Hardware Key] section:

[Hardware Key]
NLM IP Address=127.0.0.1
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser


Step 4

Change the address to the address of your server IP. (This entry is an example)

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser


Step 5

Change the Enable Network value to 1.

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=1
License Type=Laser


Step 6

Save and close the cfg file then run VTube.