Set Key License

From ATTWiki
Revision as of 14:32, 26 May 2011 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Permanent hardware keys contain licenses in memory. These licenses control which programs your computers can run with the key.(See Software License Program ID List for a list of licenses.)

If the permanent hardware key needs new or additional licenses, then we will send you a link to a program that will allow you to update the key.

Hasp hl pro.jpg


These are the steps to take to set the license in a hardware key:

STEP 1



We will ask you to find the serial number of the hardware key using Keycheck.exe.

Keycheck.exe is usually found in the \key folder under the program's folder.

You can also download the latest keycheck.exe from the Utility page on our web site: http://www.advancedtubular.com/utilitysoftware.htm

The log can be sent to us using your e-mail system using the Send Log button.

Or you can right-click on either log, then select Copy All to Clipboard.

Keycheck serialnumber.jpg

STEP 2



We will create and send you an ATTSetKey.exe program that is unique to the hardware key on your system.

Run the program.

The program will display your company name and the license information.

The program will also display the internal serial number of the hardware key. This is a unique number on the key that we sent you.

Setkey step1.jpg

STEP 3



Press the "Next" button.

Insert the permanent hardware key in the computer. If you were using a time-limited key, be sure to remove it before continuing.

Setkey step2.jpg

STEP 4



Press the "Next" button.

The program will check for a hardware key and report the results in the log.

If you see a "Match OK" in the log, then you can continue.

Setkey step3.jpg

STEP 5



Press the "Next" button

If the update occurred successfully, then the "Next" button will change to a "Close" button. Press "Close" to exit the program.

Setkey step4.jpg

STEP 6



Run the KeyCheck or the licensed program(s)

You can run the KeyCheck utility to be sure that the license was uploaded to the key. Or you can just run the licensed applications.

Setkey step5.jpg

Other Pages