Difference between revisions of "Safe Mode Cycle Hold"

From ATTWiki
Jump to: navigation, search
(About the Mode)
(About the Mode)
 
(16 intermediate revisions by one user not shown)
Line 2: Line 2:
 
==About the Mode==
 
==About the Mode==
  
'''This mode is unique to CNC Bender software combined with SMT benders'''<br>
+
When operators step on the safety mat, or software puts the bender into a [[Zero Energy State]] mode.  In this state, all motion axes are '''completely disabled''', and energy to all axes is blocked or stopped.
(Maybe other benders have this feature - but we have only found others that do not have it.)
+
 
.  It is a [[Zero Energy State]] mode when operators step on the safety mat.  In this state, all motion axes are completely disabled, and energy to all axes is blocked or stopped.
+
We strongly recommend that you require this feature for any CNC bender that you consider purchasing.  Benders with this feature are much safer than benders without it.
  
Read more about the [[Zero Energy State]] on our CNC Benders.
 
 
<br><br>
 
<br><br>
  
 
<table cellpadding="35">
 
<table cellpadding="35">
 
<tr>
 
<tr>
<td width=50>
+
<td>[[image:warning.jpg|100px]]</td>
</td>
+
 
<td width=300 bgcolor="#f0f0f0">
 
<td width=300 bgcolor="#f0f0f0">
 
<font size=6>
 
<font size=6>
Line 18: Line 16:
 
</font>
 
</font>
 
<font size=3>
 
<font size=3>
We strongly recommend that you require this feature for any CNC bender that you consider purchasing.  Benders with this feature are much safer than benders without it.
+
The only way to activate Safe Mode Cycle Hold is to either step on the safety mat or walk into the safety scanner region.<br>
 +
 
 +
<br>If you decide to work on a machine with the pump motor on, then at least step on the safety mat which disables all axes and blocks all hydraulic fluid from flowing to the hydraulic valves.<br><br>
 +
 
 +
The only device that can move in this mode is the chuck grippers/jaws.
 
</font>
 
</font>
 
</td>
 
</td>
 
</tr>
 
</tr>
 
</table>
 
</table>
 +
 +
==Other Pages==
 +
*Read about the [[Zero Energy State]] on our CNC Benders
 +
*Read about [[Safe Mode Motion Auto Recovery]]

Latest revision as of 21:19, 26 September 2009

Cncbender logo.jpg

About the Mode

When operators step on the safety mat, or software puts the bender into a Zero Energy State mode. In this state, all motion axes are completely disabled, and energy to all axes is blocked or stopped.

We strongly recommend that you require this feature for any CNC bender that you consider purchasing. Benders with this feature are much safer than benders without it.



Warning.jpg

Gear warning.jpg SAFETY NOTE

The only way to activate Safe Mode Cycle Hold is to either step on the safety mat or walk into the safety scanner region.


If you decide to work on a machine with the pump motor on, then at least step on the safety mat which disables all axes and blocks all hydraulic fluid from flowing to the hydraulic valves.

The only device that can move in this mode is the chuck grippers/jaws.

Other Pages