Revision: Benderlink for EL v4-20070619

From ATTWiki
Revision as of 15:27, 20 June 2007 by Mcone (Talk | contribs)

Jump to: navigation, search
Blinkel mainscreen.jpg


Contents





REPAIRED: FLOAT POINT CONVERSION IN VERY SMALL NUMBERS

BACKGROUND

AICON technicians discovered problems with the conversion of very small numbers between Benderlink and Eaton Leonard controls.

RESOLUTION

We carefully examined the values from a Premier control starting at 0.001 then moving upward and discovered the problem. We are confident that the problem is completely resolved and proved through a test devised by AICON.


REPAIRED: CONVERSION

BACKGROUND

The Die Clearance value is a linear distance. We discovered that it was not converting between the two units in the main log.

RESOLUTION

This has been repaired.





ENHANCED: EDIT FLOAT VALUES

BACKGROUND

Some floating point edit boxes in the Edit window would accept non-numeric characters during edit.

RESOLUTION

The boxes are now programmed to restrict entry to only numeric values.






ENHANCED: PERSISTENT UNIT STATE

Blinkel units button.jpg Blinkel units button edit window.jpg

BACKGROUND

AICON technicians asked us to make the unit state buttons in both the main window and the edit window persistent.

ENHANCEMENT

When closing Benderlink, the state of the main unit button is saved to the Windows registry. When loading Benderlink, both sets of unit buttons are set to the last main menu unit button state.





NEW SKIN

Benderlink includes a new Pulsar skin in the updated installation.

Blinkel skin pulsar.jpg





UPDATED: HELP FILES

The Benderlink help files are updated to include new features (like Edit) in the help system.

You can also download the new help file here:

[1] Benderlink Help File - in Windows CHM help format

[2] Benderlink Help File - in PDF format

ADDED: BENDERLINK DATA SHEETS TO SETUP FILE

The Benderlink PDF data sheets for both the Benderlink software and the Benderlink Ethernet Module were added to the setup. They are installed to the main Benderlink folder (default path: c:\program files\blinkel)

The two files are:

benderlink_el_v4_datasheet.pdf benderlink_el_ethernet_module_datasheet.pdf

These files can also be downloaded from:

[3] Software Data Sheet

[4]Ethernet Module Data Sheet