Difference between revisions of "Revision: Benderlink for EL v4-20070619"

From ATTWiki
Jump to: navigation, search
 
Line 13: Line 13:
 
=== RESOLUTION ===
 
=== RESOLUTION ===
 
We carefully examined the values from a Premier control starting at 0.001 then moving upward and discovered the problem.  It is completely resolved and proved through a test devised by AICON.
 
We carefully examined the values from a Premier control starting at 0.001 then moving upward and discovered the problem.  It is completely resolved and proved through a test devised by AICON.
 
[[image:blinkel_editscreen.jpg|right|400px]]
 
  
 
=== REPAIRED: CONVERSION ===
 
=== REPAIRED: CONVERSION ===

Revision as of 14:50, 20 June 2007

Blinkel mainscreen.jpg


Contents





REPAIRED: FLOAT POINT CONVERSION IN VERY SMALL NUMBERS

BACKGROUND

AICON technicians discovered problems with the conversion of very small numbers between Benderlink and Eaton Leonard controls.

RESOLUTION

We carefully examined the values from a Premier control starting at 0.001 then moving upward and discovered the problem. It is completely resolved and proved through a test devised by AICON.

REPAIRED: CONVERSION

The Die Clearance is linear and was not converting between the two units. This has been fixed.





ENHANCED: EDIT FLOAT VALUES

All of the edit boxes for the SETUP and EXTENDED SETUP values will no longer allow any character except those used to form numbers.

RECALL



2 Bends

Method: Ethernet Cable with Benderlink Module
Time: 5 Seconds

RECALL



63 Bends

Method: Ethernet Cable with Benderlink Module
Time: 21 seconds

SEND



2 Bends

Method: Ethernet Cable with Benderlink Module
Time: 7 Seconds

SEND



63 Bends

Method: Ethernet Cable with Benderlink Module
Time: 30 seconds

(Speeds for wireless (WiFi) are usually slower than the speeds shown above.)




MULTIPLE SKINS

BACKGROUND

As of Benderlink for EL v4, we've been adding skins the interface of Benderlink. Customers have responded positively regarding the new look, so we are now sending the setup file of this version of Benderlink with multiple skins that can be changed by operators.

Blinkel skinmenu.jpg

HOW TO CHANGE

Click on the caption icon for the form (in the upper left corner) to access the skins menu. The default skin is BlueGauze.

Blinkel mainscreen2.jpg

PERSISTENCE

The skins are persistent through storage in the Windows Registry.