Revision: Benderlink for Chiyoda/Keins 5.85

From ATTWiki
Revision as of 17:06, 5 December 2007 by Mcone (Talk | contribs)

Jump to: navigation, search

Check.jpg New Drawing Number & Filename Synchronization

Benderlink now asks if the internal drawing number should be reset to be equal to the channel filename.



Read the details below.




HOW IT WORKS

    Description



    This is an example that starts with an INTERNAL drawing number of kb889543, and is given a new name of Rename12345678 during the SAVE process. See in STEP 5 how Benderlink handles the difference in internal and external names.

    STEP 1



    Press the File Data button in the main menu

    Benderlink namesync 1.jpg

    STEP 2



    Choose Save Data to File for a single channel

    Benderlink namesync 2.jpg


    STEP 3



    Type a new filename for this channel data

    Benderlink namesync 3.jpg

    STEP 4



    Change the new filename on the keyboard

    Benderlink namesync 4.jpg

    STEP 5



    Press SAVE

    Benderlink namesync 5.jpg

    STEP 6



    Select the DATA SOURCE then press the CONTINUE button

    Benderlink namesync 6.jpg

    In this example, we are choosing from "Memory" - which only saves the data currently in memory without refreshing the data from the bender first.

    STEP 7



    Select YES, NO, or CANCEL

    (In this example, we press "YES")

    Benderlink namesync 7.jpg

    YES: Select YES to synchronize the internal drawing number with the filename before saving the channel (part) file

    NO: Select NO to skip synchronization

    CANCEL: Select CANCEL to stop the save process entirely

    STEP 8



    Select the PREVIOUS button

    Benderlink namesync 8.jpg

    STEP 9



    The internal drawing number name has changed with the file save

    Benderlink namesync 9.jpg