Revision: Benderlink for Chiyoda/Keins 5.85

From ATTWiki
Revision as of 17:06, 5 December 2007 by Mcone (Talk | contribs)

Jump to: navigation, search

Check.jpg New Drawing Number & Filename Synchronization

Benderlink now asks if the internal drawing number should be reset to be equal to the channel filename.



Read the details below.




HOW IT WORKS

    Filename / Drawing Number Synchronization Feature



    This is an example that starts with an INTERNAL drawing number of kb889543, and is given a new name of Rename12345678 during the SAVE process. See in STEP 5 how Benderlink handles the difference in internal and external names.

    STEP 1



    Press the File Data button in the main menu

    Benderlink namesync 1.jpg

    STEP 2



    Choose Save Data to File for a single channel

    Benderlink namesync 2.jpg


    STEP 3



    Type a new filename for this channel data

    Benderlink namesync 3.jpg

    STEP 4



    Change the new filename on the keyboard

    Benderlink namesync 4.jpg

    STEP 5



    Press SAVE

    Benderlink namesync 5.jpg

    STEP 6



    Select the DATA SOURCE then press the CONTINUE button

    Benderlink namesync 6.jpg

    In this example, we are choosing from "Memory" - which only saves the data currently in memory without refreshing the data from the bender first.

    STEP 7



    Select YES, NO, or CANCEL

    (In this example, we press "YES")

    Benderlink namesync 7.jpg

    YES: Select YES to synchronize the internal drawing number with the filename before saving the channel (part) file

    NO: Select NO to skip synchronization

    CANCEL: Select CANCEL to stop the save process entirely

    STEP 8



    Select the PREVIOUS button

    Benderlink namesync 8.jpg

    STEP 9



    The internal drawing number name has changed with the file save

    Benderlink namesync 9.jpg