Revision: Benderlink for BLM 5.3

From ATTWiki
Revision as of 01:58, 14 September 2015 by Mcone (Talk | contribs)

Jump to: navigation, search

Benderlink blm logo.jpg

Revision 5.3

Blinkblm v5 screen.jpg





Check.jpg ENHANCED - The LASERVISION Protocol is Enhanced

The internal communications logic was enhanced to work properly with Windows versions of LASERVISION. (It already worked with DOS versions of LASERVISION.)

Vector tube data center.jpg



Check.jpg NEW - Click on LED to Open Port to Measuring Center

You can now click on the LED port indicator to open a connection to the measuring center.

Blinkblm clickon led toggle.png




Check.jpg FIXED - Ping Port Confirmation Works in Newer Windows

This feature allows Benderlink to ping for a serial device server before opening a virtual port.

The feature worked in older Windows - but did not work in Windows 7 and higher. Now it works in the newer Windows versions too.

Blinkblm pingportconfirmation.png



Check.jpg NEW - Message Warning for Ports That Cannot Open

When a port to the measuring center cannot open, Benderlink now displays a message that a problem occurred.

400



Other Pages