Revision: Benderlink for BLM 5.3

From ATTWiki
Revision as of 01:57, 14 September 2015 by Mcone (Talk | contribs)

Jump to: navigation, search

Benderlink blm logo.jpg

Revision 5.3

Blinkblm v5 screen.jpg





Check.jpg ENHANCED - The LASERVISION Protocol is Enhanced

The Laservision protocol will now work properly with Windows versions of LASERVISION

Vector tube data center.jpg




Check.jpg NEW - Click on LED to Open Port to Measuring Center

You can now click on the LED port indicator to open a connection to the measuring center.

Blinkblm clickon led toggle.png




Check.jpg FIXED - Ping Port Confirmation Works in Newer Windows

This feature allows Benderlink to ping for a serial device server before opening a virtual port.

The feature worked in older Windows - but did not work in Windows 7 and higher. Now it works in the newer Windows versions too.

Blinkblm pingportconfirmation.png



Check.jpg NEW - Message Warning for Ports That Cannot Open

When a port to the measuring center cannot open, Benderlink now displays a message that a problem occurred.

400



Other Pages