Difference between revisions of "Restart the HASP Service"

Revision as of 18:11, 25 January 2011

Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver:
Go to the Utility Software page and download the HASP Command Line Hardware Key Driver. The haspdinst.exe software is zipped in this download.

STEP 1 - Remove the HASP hardware key(s) from the USB port(s) on the computer.
STEP 2 - From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory.	haspdinst -fr -kp -purge
STEP 3 - Reboot the computer.
STEP 4 - From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again.	haspdinst -kp -i

@@ Line 21: / Line 21: @@
 <table cellpadding=10>
 <tr>
-<td width=450>
+<td width=350>
-STEP 1 - Remove the HASP hardware key(s) from the USB port(s) on the computer.
+'''STEP 1''' - Remove the HASP hardware key(s) from the USB port(s) on the computer.
 </td>
 <td>
@@ Line 30: / Line 30: @@
 <tr>
 <td>
-STEP 2 - From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory.
+'''STEP 2''' - From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory.
 </td>
 <td>
@@ Line 39: / Line 39: @@
 <tr>
 <td>
-STEP 3 - Reboot the computer.
+'''STEP 3''' - Reboot the computer.
 </td>
 <td>
@@ Line 47: / Line 47: @@
 <tr>
 <td>
-STEP 4 - From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again.
+'''STEP 4''' - From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again.
 </td>
 <td>