Difference between revisions of "ROMER Certified Length Bar"

From ATTWiki
Jump to: navigation, search
(ROMER RDS Control Panel Probe Quick Check Feature)
(HEXAGON ACCESSORIES SITE)
Line 73: Line 73:
  
 
You can purchase new probes at [https://store.hexagonmetrology.us/romer-accessories the HEXAGON site].
 
You can purchase new probes at [https://store.hexagonmetrology.us/romer-accessories the HEXAGON site].
 +
<br><br>
 
<br><br>
 
<br><br>
  

Revision as of 23:47, 15 January 2018

Contents

ROMER Certified Length Bar



ROMER Scanner Plus Hex Logo.png



Recommended - But Not Standard

Certified length bars are good for verifying that your arm is working properly.

The standard length bars use the 15mm calibration probe in one of three sockets.

There are three lengths available:

  1. 305 mm
  2. 711 mm
  3. 1016 mm



For most customers using a 2.5 meter arm, the recommended length bar to purchase is the 711 mm.

ROMERCertifiedLengthBar.png

ROMER RDS Control Panel Probe Quick Check Feature

The ROMER RDS system allows you to easily perform a quick check for the arm with the 15 mm hard probe installed.

The procedure is inside the RDS Control Panel - Probe menu.

RDSControlPanel ProbeCheckEntry.png


Follow the steps to perform a length check.

RDSDataCollectorProbeLengthCheck.png



HEXAGON ACCESSORIES SITE

You can purchase new probes at the HEXAGON site.



Other Pages