Difference between revisions of "Processlist"

From ATTWiki
Jump to: navigation, search
Line 7: Line 7:
 
<br>This is the middle of a sample [[processlist]]:<br><br>
 
<br>This is the middle of a sample [[processlist]]:<br><br>
  
<font size=1><code>
+
<font size=1><pre><code>
 
[DISPLAY] Next Step: (FRB Row 1) Close Pressure Die And Clamp, Home Boost Dies
 
[DISPLAY] Next Step: (FRB Row 1) Close Pressure Die And Clamp, Home Boost Dies
 
AllDiesClose = cto:6000
 
AllDiesClose = cto:6000
Line 35: Line 35:
 
MandrelRetract = cto:6000
 
MandrelRetract = cto:6000
 
[DISPLAY] Completed: (FRB Row 1) Retract Mandrel
 
[DISPLAY] Completed: (FRB Row 1) Retract Mandrel
</code></font>
+
</code></pre></font>

Revision as of 20:29, 25 April 2008

Cncbender logo.jpg

Operatorstation model.jpg

A processlist is a list of commands to move the bender. This list is what CNC Processor uses to administrate motion.



This is the middle of a sample processlist:

<code>
[DISPLAY] Next Step: (FRB Row 1) Close Pressure Die And Clamp, Home Boost Dies
AllDiesClose = cto:6000
[DISPLAY] Completed: (FRB Row 1) Close Pressure Die And Clamp, Home Boost Dies

[DISPLAY] Next Step: (FRB Row 1) Set Clamp Pressure To 0 %
SetClampPressure = pwr0:0.00000000, cto:6000
[DISPLAY] Completed: (FRB Row 1) Set Clamp Pressure To 0 %

[DISPLAY] Next Step: (FRB Row 1) Set PD Pressure To 0 %
SetPDPressure = pwr0:0.00000000, cto:6000
[DISPLAY] Completed: (FRB Row 1) Set PD Pressure To 0 %

[DISPLAY] Next Step: (FRB Row 1) Set Torque On Feed Axis To 15 %
SetTorqueFeed = tqe0:15
[DISPLAY] Completed: (FRB Row 1) Set Torque On Feed Axis To 15 %

[DISPLAY] Next Step: (FRB Row 1) Move Feed Axis +47.8779 MM Relative, and Move Bend Axis +90.0000 DEG Relative With Bottom Boost
FeedBendBoost1 = pos2:47.87787204, vel2:35.09566238, ump2:1, adp2:3, pos3:90.00000000, vel3:63.33333333, ump3:1, cto:60000
[DISPLAY] Completed: (FRB Row 1) Move Feed Axis +47.8779 MM Relative, and Move Bend Axis +90.0000 DEG Relative With Bottom Boost

[DISPLAY] Next Step: (FRB Row 1) Set Torque On Feed Axis To 90 %
SetTorqueFeed = tqe0:90
[DISPLAY] Completed: (FRB Row 1) Set Torque On Feed Axis To 90 %

[DISPLAY] Next Step: (FRB Row 1) Retract Mandrel
MandrelRetract = cto:6000
[DISPLAY] Completed: (FRB Row 1) Retract Mandrel
</code>