Difference between revisions of "Offline License Activation"

• Back to VTube-STEP
• Back to VTube-LASER
• See also How to Copy a default VTube configuration to another computer with VTube

STEP 1

This page assumes the USB key has been programmed using the program link sent from Advanced Tubular and the software has been installed.

1) Activate From Another Computer 2) Enter License ID and Activation Password 3) Save the activation file to a location that can be found on a second computer connected to the internet or a flash drive for ease 4) Transfer the activation file to the computer connected to the internet 5) Follow the written instructions once you load the activation file onto the connected computer 6) Exit the activation application on the disconnected computer and restart VTube. It will now be activated and ready for use.

STEP 2

Program the USB using the link sent from Advanced Tubular. This step only needs to be completed ONE time.

STEP 3

Plug the USB key in and activate on the first computer using the License ID and Activation Password provided by Advanced Tubular.

These steps are for ONLINE activation.

STEP 4

In order to use the same key on a different computer, the first user will need to DEACTIVATE on their computer before the next user can ACTIVATE on their computer. The software can only be activated at one computer at a time.

Run the VTubeDeactivate.exe on computer 1 before activating on computer 2.

Use the path below to find the Deactivate.exe file (with the current VTube software installed on that computer)

STEP 5

Press the blue Deactivate button > Yes. It is now deactivated and able to be activated using the same License ID and Activation Password as the first user.