Master Power On

From ATTWiki
Revision as of 23:36, 20 September 2007 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Cncbender logo.jpg

Master Power On is the state in which all of the safety stops (E-stops) are cleared and the bender pump is switched on. To switch the Master Power on, clear all the E-stops and safety mechanisms, then press the Master Power On button. In this state, the Master Power On button will illuminate green. If an E-stop, safety mat, or bend-arm safety plate is tripped, then the electronics in the bender will switch the Master Power OFF.

See also: Can Master Power Be Kept ON by CNC Bender?


--Mcone 19:02, 29 June 2006 (EDT)