Difference between revisions of "Master Power On"

From ATTWiki
Jump to: navigation, search
 
Line 1: Line 1:
 
Master Power On is the state in which all of the safety stops (E-stops) are cleared and the bender pump is switched on.  
 
Master Power On is the state in which all of the safety stops (E-stops) are cleared and the bender pump is switched on.  
  
In this state, the Master Power On button will illuminate green.
+
To switch the Master Power on, clear all the E-stops and safety mechanisms, then press the Master Power On button.  In this state, the Master Power On button will illuminate green.
  
 
If an E-stop, safety mat, or bend-arm safety plate is tripped, then the electronics in the bender will switch the Master Power OFF.
 
If an E-stop, safety mat, or bend-arm safety plate is tripped, then the electronics in the bender will switch the Master Power OFF.

Revision as of 23:03, 29 June 2006

Master Power On is the state in which all of the safety stops (E-stops) are cleared and the bender pump is switched on.

To switch the Master Power on, clear all the E-stops and safety mechanisms, then press the Master Power On button. In this state, the Master Power On button will illuminate green.

If an E-stop, safety mat, or bend-arm safety plate is tripped, then the electronics in the bender will switch the Master Power OFF.


--Mcone 19:02, 29 June 2006 (EDT)