Difference between revisions of "MQ85"

From ATTWiki
Jump to: navigation, search
(Firmware Versions)
 
(8 intermediate revisions by one user not shown)
Line 1: Line 1:
[[image:ChiyodaMQ85.jpg|right]]
+
[[image:ChiyodaMQ85.jpg|right|300px]]
==About this model==
+
[[image:KeinsMQ85.png|right|300px]]
The MQ85 model is a touch-screen version of the control.  To the best of our knowledge, everyone of these controls can be upgraded to communicate with a firmware upgrade (if necessary).
+
  
  
==Firmware Versions==
+
==About this model==
Touch-screen Chiyoda controls version 11.19 and earlier will '''not''' communicate due to an early bug in the communications logicThis was repaired in later versionsThe first version that we know of that will communicate is 11.A0(Some refer to this as 11.21A0)
+
The MQ85 model is sold as either a Chiyoda (the green bender) or a KEINS (the blue bender). (The two benders are very similar due to a chief engineer splitting from Chiyoda and starting his own company, COMCO.) They are both touch-screenTo the best of our knowledge, everyone of the CHIYODA controls can be upgraded to communicate with a firmware upgrade if necessaryAlso, all MQ85 KEINS benders will communicate.
  
==Control Types==
+
==Firmware Versions for CHIYODA==
[http://www.advancedtubular.com/BenderlinkIV/chiyoda_controls.htm] See this page for information on the different control types Advanced Tubular Benderlink software can communicate with.   
+
Touch-screen Chiyoda controls version 11.19 and earlier will '''not''' communicate due to a bug in the communications logic. This was repaired in later versions. The first version that we know of that will communicate is 11.A0(Some refer to this as 11.21A0)
  
 
==Other Pages==
 
==Other Pages==
Back to [[Chiyoda]]
+
* Back to [[Chiyoda]]
 +
* Back to [[KEINS]]

Latest revision as of 22:59, 25 February 2019

ChiyodaMQ85.jpg
KeinsMQ85.png


About this model

The MQ85 model is sold as either a Chiyoda (the green bender) or a KEINS (the blue bender). (The two benders are very similar due to a chief engineer splitting from Chiyoda and starting his own company, COMCO.) They are both touch-screen. To the best of our knowledge, everyone of the CHIYODA controls can be upgraded to communicate with a firmware upgrade if necessary. Also, all MQ85 KEINS benders will communicate.

Firmware Versions for CHIYODA

Touch-screen Chiyoda controls version 11.19 and earlier will not communicate due to a bug in the communications logic. This was repaired in later versions. The first version that we know of that will communicate is 11.A0. (Some refer to this as 11.21A0)

Other Pages