Revision as of 16:19, 21 January 2010 by
← Older revision
| Latest revision (diff) | Newer revision → (diff)
A Jog Motion is a motion for a single axis or actuator that is stored in a
for use by
if you choose to teach the bender. (See Screen 1)
Custom Commands begin without any Jog Motions (See Screen 2) Add a Jog Motion using the Add a jog motion button
Now the Jog Motion exists, but it is unassigned or empty. Click on the Jog Motion name cell to select a Jog Motion. (See Screen 3)
Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 4)
Jog Motion values can be entered using a keyboard, or entered using
Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.
Screen 4: Select a Jog Motion from the Selection menu
Screen 1: Three Jog Motions in a Custom Command - All three run at the same time.
Screen 2: An empty Custom Command (no Jog Motions present)
Screen 3: Click on an unassigned (empty) Jog Motion cell to select a Jog Motion
Jog Motion System Configuration
The existence of a Jog Motion in the CNC Bender user interface is completely configurable.
You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.
You can even rename the Jog Motion name (or translate the motion to another language).
CNC Bender Software Updates
CNC Bender General Information
CNC Bender v12-20100105
Retrieved from "
Knowledgebase Home Page
AdvancedTubular.com Home Page
Benderlink Ethernet Module
Bender to XYZ
Network License Manager
LogMeIn Rescue Service
Software License Program ID List
What links here
This page was last modified on 21 January 2010, at 16:19.
This page has been accessed 11,157 times.