Jog Motion

From ATTWiki
Revision as of 20:11, 18 January 2010 by Mcone (Talk | contribs)

Jump to: navigation, search
  • A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender.

  • Jog Motions are selected from the Jog Motion Selection menu (See Screen 2)

  • Jog Motion values can be entered using a keyboard, or entered using Teach Mode

  • Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

  • The existence of a Jog Motion in the CNC Bender user interface is completely configurable.

  • You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.

  • You can even rename the Jog Motion name (or translate the motion to another language).

Screen 1: Three Jog Motions in a Custom Command - All three run at the same time.
Screen 2: Select a Jog Motion from the Selection menu