Jog Motion

From ATTWiki
Revision as of 19:58, 18 January 2010 by Mcone (Talk | contribs)

Jump to: navigation, search
  • A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender.

  • Jog Motions can be entered using a keyboard, or entered using Teach Mode

  • Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

  • The existence of a Jog Motion in the CNC Bender user interface is completely configurable. You can add your own Jog Motions or remove the existing Jog Motions from the user interface using a single configuration file.



Screen 1: Select one of the Edit Custom buttons a bend in the FRB page
Screen 2: Custom Commands List Selection


Screen 3: Custom Command Editor