Difference between revisions of "Jog Motion"

From ATTWiki
Jump to: navigation, search
Line 2: Line 2:
 
<tr valign=top>
 
<tr valign=top>
 
<td width=300>
 
<td width=300>
* A Jog Motion is a motion for a single axis or actuator that is stored in a [[Custom Command]] for use by [[Teach Mode]] if you choose to teach the bender.<br><br>
+
* A Jog Motion is a motion for a single axis or actuator that is stored in a [[Custom Command]] for use by [[Teach Mode]] if you choose to teach the bender. (Screen 1 shows a Custom Command with Jog Motions)<br><br>
  
* Jog Motions are selected from the Jog Motion Selection menu (See Screen 2)<br><br>
+
* Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 2)<br><br>
  
 
* Jog Motion values can be entered using a keyboard, or entered using [[Teach Mode]]<br><br>
 
* Jog Motion values can be entered using a keyboard, or entered using [[Teach Mode]]<br><br>

Revision as of 20:13, 18 January 2010

  • A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender. (Screen 1 shows a Custom Command with Jog Motions)

  • Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 2)

  • Jog Motion values can be entered using a keyboard, or entered using Teach Mode

  • Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

  • The existence of a Jog Motion in the CNC Bender user interface is completely configurable.

  • You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.

  • You can even rename the Jog Motion name (or translate the motion to another language).

Screen 1: Three Jog Motions in a Custom Command - All three run at the same time.
Screen 2: Select a Jog Motion from the Selection menu