Difference between revisions of "Jog Motion"

From ATTWiki
Jump to: navigation, search
Line 10: Line 10:
 
* The existence of a Jog Motion in the CNC Bender user interface is completely configurable.<br><br>
 
* The existence of a Jog Motion in the CNC Bender user interface is completely configurable.<br><br>
  
* You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.
+
* You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.<br><br>
  
 
* You can even rename the Jog Motion name (or translate the motion to another language).<br><br>
 
* You can even rename the Jog Motion name (or translate the motion to another language).<br><br>

Revision as of 19:59, 18 January 2010

  • A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender.

  • Jog Motions can be entered using a keyboard, or entered using Teach Mode

  • Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

  • The existence of a Jog Motion in the CNC Bender user interface is completely configurable.

  • You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.

  • You can even rename the Jog Motion name (or translate the motion to another language).

Screen 1: Select one of the Edit Custom buttons a bend in the FRB page
Screen 2: Custom Commands List Selection


Screen 3: Custom Command Editor