Difference between revisions of "Jog Motion"

Revision as of 19:58, 18 January 2010

A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender.

Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

The existence of a Jog Motion in the CNC Bender user interface is completely configurable. You can add your own Jog Motions or remove the existing Jog Motions from the user interface using a single configuration file.

Screen 1: Select one of the Edit Custom buttons a bend in the FRB page

Screen 2: Custom Commands List Selection

Screen 3: Custom Command Editor

@@ Line 8: / Line 8: @@
 * Multiple Jog Motions can be stored in a single Custom Command.  When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.<br><br>
-* The existence of Jog Motions are completely configurable.  You can add your own Jog Motions or remove the existing Jog Motions from the user interface using a single configuration file.
+* The existence of a Jog Motion in the CNC Bender user interface is completely configurable.  You can add your own Jog Motions or remove the existing Jog Motions from the user interface using a single configuration file.
 <br><br>
 </td>