Inspection Tolerances

From ATTWiki
Revision as of 15:22, 20 February 2023 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png



Different Tolerances

The tolerances inside the Inspection Tab can be adjusted to qualify parts to different standards.

Radial

This value changes the tolerance the shape of the tube is qualified to.

Vtubeinspectiondata.png

Linear

This value effects the ends of the tube.

Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand cornder of VTube

Vtubecloseup.png

Angular

This value effects the angle tolerance.



Other Pages