Inspection Tolerances

Back to VTube-STEP Back to VTube-LASER

Different Tolerances

The tolerances inside the Inspection Tab can be adjusted to qualify parts to different standards.

Radial Use the toolbar button to clear VTube.
Linear Change the values in VTube to whatever you want them be when you perform a project clear in the future. Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube. (Of course, you can do this, if you really intend to do it.)
Angular Press the System Options button.

Other Pages

• Back to the VTube-STEP page
• Back to the VTube-LASER page