Difference between revisions of "Inspection Tolerances"

From ATTWiki
Jump to: navigation, search
(Radial)
(Angular)
 
Line 44: Line 44:
  
 
===Angular===
 
===Angular===
'''This value effects the angle tolerance.''' These values can be adjusted independently. Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand corner of VTube </td>
+
'''This value effects the angle tolerance.''' <br><br> These values can be adjusted independently. Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand corner of VTube </td>
 
<td>
 
<td>
 
</td>
 
</td>

Latest revision as of 15:29, 20 February 2023

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png



Different Tolerances

The tolerances inside the Inspection Tab can be adjusted to qualify parts to different standards.

Radial

This value changes the tolerance the shape of the tube is qualified to.

Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand corner of VTube

Vtubeinspectiondata.png

Linear

This value effects the ends of the tube.

Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand corner of VTube

Vtubecloseup.png

Angular

This value effects the angle tolerance.

These values can be adjusted independently. Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand corner of VTube



Setting a default tolerance

Once you have the default tolerance set for the part, save the project and the tolerances will be the same each time the part is loaded.

To set the default tolerances going forward for new projects, follow the steps in Default Tolerances

Other Pages