Difference between revisions of "Inspection Tolerances"

From ATTWiki
Jump to: navigation, search
(Linear)
(Linear)
Line 34: Line 34:
 
<td width=300>
 
<td width=300>
 
===Linear===
 
===Linear===
'''This change effects the ends of the tube.'''<br><br> Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand cornder of VTube</td>
+
'''This value effects the ends of the tube.'''<br><br> Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand cornder of VTube</td>
 
<td>
 
<td>
 
[[image:vtubecloseup.png|700px]]
 
[[image:vtubecloseup.png|700px]]

Revision as of 15:20, 20 February 2023

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png



Different Tolerances

The tolerances inside the Inspection Tab can be adjusted to qualify parts to different standards.

Radial

Use the toolbar button to clear VTube.

Vtubeinspectiondata.png

Linear

This value effects the ends of the tube.

Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand cornder of VTube

Vtubecloseup.png

Angular

Press the System Options button.



Other Pages