Difference between revisions of "Inspection Tolerances"

Revision as of 15:20, 20 February 2023

The tolerances inside the Inspection Tab can be adjusted to qualify parts to different standards.

Radial Use the toolbar button to clear VTube.
Linear This change effects the ends of the tube. Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand cornder of VTube
Angular Press the System Options button.

@@ Line 34: / Line 34: @@
 <td width=300>
 ===Linear===
-'''Change the values in VTube to whatever you want them be when you perform a project clear in the future.'''<br><br>  Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube.  (Of course, you can do this, if you really intend to do it.)</td>
+'''This change effects the ends of the tube.'''<br><br> Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand cornder of VTube</td>
 <td>
 [[image:vtubecloseup.png|700px]]