Importing a .STP File

From ATTWiki
Revision as of 20:49, 16 February 2023 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 1.96.png

VTS2 SplashScreen1.png


This document shows the process of importing a STEP file into VTube-STEP

The files used are .stp files.

Steps to import a .stp file into VTube-STEP

STEP 1

Make sure VTube-STEP is cleared.

STEP 2

Under Import/Export, import a STEP File-STP.

Vtube-v3.2 ATTUSB.png

STEP 3

Load the desired part into VTube-STEP from the file it is saved in inside file explorer

Vtube v3.2 CHSpart.png

STEP 4

To collect parametric data, an operator can either autobuild or manually collect features.

For Autobuild

For Manual Collection

Vtube v3.2 CHS.png


STEP 5

Rebuild Parametric Tube from Collected

Vtube-STEP v3.2chstemplate.png

STEP 6

Press the Export to Chiyoda EX Data File button and choose the thumb drive from a persistent path or press Continue with no Selection and find the thumb drive on the computer.

Vtube-v3.2 exportchs.png

STEP 7

Save the .CHS file to the same thumb drive, remove it and take it back to the bender

Vtube v3.2 ATTUSB.png

STEP 8

Load the file in the bender and bend the part. Make sure to double check the data in VTube-STEP matches the data in the bender.

Vtube v2.2 chiyodacontrol.png


Other Pages