Importing a .STP File

From ATTWiki
Revision as of 19:45, 16 February 2023 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Vtube-step logo 1.96.png

VTS2 SplashScreen1.png


This document shows the process of importing a STEP file into VTube-STEP

The files used are .stp files.

Steps to import a .stp file into VTube-STEP

STEP 1

Make sure VTube-STEP is cleared.

STEP 2

Under Import/Export, import a STEP File-STP.

Vtube-v3.2 ATTUSB.png

STEP 3

Load the desired part into VTube-STEP from the file it is saved in inside file explorer

Vtube v3.2 CHSpart.png

STEP 4

In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS

Vtube v3.2 CHS.png


STEP 5

Choose the template file from the thumb drive and load it into VTube.

Vtube-STEP v3.2chstemplate.png

STEP 6

Press the Export to Chiyoda EX Data File button and choose the thumb drive from a persistent path or press Continue with no Selection and find the thumb drive on the computer.

Vtube-v3.2 exportchs.png

STEP 7

Save the .CHS file to the same thumb drive, remove it and take it back to the bender

Vtube v3.2 ATTUSB.png

STEP 8

Load the file in the bender and bend the part. Make sure to double check the data in VTube-STEP matches the data in the bender.

Vtube v2.2 chiyodacontrol.png


Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Importing_a_.STP_File&oldid=43515"