Difference between revisions of "Importing a .STP File"

From ATTWiki
Jump to: navigation, search
(→‎STEP 5)
Line 93: Line 93:
 
<td width=300>
 
<td width=300>
  
−
===STEP 7===
 
−
Save the .CHS file to the same thumb drive, remove it and take it back to the bender</td>
 
−
<td>
 
−
[[image:vtube_v3.2_ATTUSB.png|300px]]
 
−
</td>
 
−
</tr>
 
−
 
−
<tr>
 
−
<td width=300>
 
−
 
−
===STEP 8===
 
−
Load the file in the bender and bend the part. Make sure to double check the data in VTube-STEP matches the data in the bender. </td>
 
−
<td>
 
−
[[image:vtube_v2.2_chiyodacontrol.png|150px]]
 
−
</td>
 
−
</tr>
 
−
 
−
</table>
 
−
<br>
 
  
 
==Other Pages==
 
==Other Pages==
  
 
*Back to the [[VTube-STEP]] page
 
*Back to the [[VTube-STEP]] page

Revision as of 21:01, 16 February 2023

Vtube-step logo 1.96.png


This document shows the process of importing a STEP file into VTube-STEP

The files used are .stp files.

Steps to import a .stp file into VTube-STEP

STEP 1

Make sure VTube-STEP is cleared.

Vtube-v4 CLEARED.png

STEP 2

Under Import/Export, import a STEP File-STP.

Vtube-v4 import.png

STEP 3

Load the desired part into VTube-STEP from the file it is saved in inside file explorer

Vtube v4demo6.png

STEP 4

To collect parametric data, an operator can either autobuild or manually collect features.

For Autobuild

For Manual Collection

Vtube v4autobuild.png


STEP 5

  • Rebuild Parametric Tube from Collected if manual collection was used

Vtube-STEP v4rebuild.png

STEP 6

The XYZ and LRA grid will now have parametric data in them. This information can be sent to a bender, or brought into VTube-LASER to be measured against.

Vtube-v4parametric.png


Other Pages
Retrieved from "http://www.advancedtubular.wiki/index.php?title=Importing_a_.STP_File&oldid=43533"