How to Register the VTube License

From ATTWiki
Revision as of 14:40, 6 June 2022 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 1.96.png

VTS2 SplashScreen.png

THE INFORMATION ON THIS PAGE IS OBSOLETE

Contents


About VTube License Registration

Every VTube-STEP software package installed requires both a USB dongle plus a simple registration process.

The additional registration step helps us verify that an authorized license is being installed by one of our valued customers.

Key ok.png


START - Plug in the USB License Dongle

Plug the USB license dongle into a USB port.

The green LED should eventually turn ON. (It may blink at first - but eventually it should stop blinking and constantly turn on.)

For First-Time Installations: You May Need to Activate the USB License Dongle

We often ship dongles without being activated. Activation is a one-time process that puts license data on the dongle. If you have not activated the dongle using the dongle activation program, then you will need to do that now. If you have already performed this step, then you can skip to the next step.

Securedonglex plug in.png


NEXT - Run VTube

</td> </td> <td> Vtube-step needs to be registered message2.png

</td> </table>

NEXT - Enter the License ID and Activation Password

Start VTube after you install VTube the first time and have plugged in and activated the USB license dongle.

You will see a screen with a Activate VTube-STEP message like this one within about 5 seconds.

Activation Options

An activation message allows users to activate online or from another computer.

Click on an option to start registration.

Vtube-step needs to be registered message1.png

You can enter the License ID and Activation password we provided or request the credentials by emailing us.



Vtube licenseidactivationpassword.png


NEXT - "REGISTRATION COMPLETE" Message

VTube will report if the registration was successful.

Press Continue.

Vtube registration screen - registration - Registration Complete.png


LAST STEP - RESTART VTUBE

A VTube restart is required after registration the first time (a computer reboot is not required). VTube will close after registration is complete.

You can see the registration information at the bottom of the VTube window in the status bar at any time.

Vtube-step statusbar registered michaelcone.png



If You Need Help - Remote TeamViewer Support

Our Software Maintenance Plan service also offers you free remote support for installation. (If you are installing a new license or have been given the right to install an upgrade, then your SMP will be active.)

If you prefer to have us help you with the installation, then we can connect remotely to your computer to install the license for you. For legitimate customers, we can register the license on your computer in a few minutes. Contact [email protected] if you need to schedule a TeamViewer connection.

TeamViewerLogo.png


Other Pages