How To Calculate Cut Lengths in VTube

From ATTWiki
Revision as of 20:46, 22 September 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg XYZ Intersection Tolerances

Vtube-laser 1.77.3.jpg


Calculating Cut Length in the Part Setup Menu

You can calculate the cut length of the tube in the Part Setup menu in either STEP or LASER modes.

To calculate the cut length, right click on the Part Setup menu, and choose "Calculate Cut Length".

Vtube-1.94 partsetup popupmenu alone.png

Vtube-1.94 partsetup popupmenu.png

How to Remove Elongation From the Cut Length

VTube also uses the Tube Elongation Percentage value to remove anticipated elongation.

The more positive the value the more elongation is removed from the cut length. A typical value is between 3 and 5 (percent).



Vtube-1.94 tube elongation percentage zero.png
Vtube-1.94 tube elongation percentage four.png

XYZ Intersection +/- Tolerance Values in Printed Reports

The XYZ Intersection deviation values can be included in reports:

  1. plus tolerance values
  2. minus tolerance values
  3. out of tolerance values

Vtube-laser-1.91-report xyz intersection deviation output full.png

The first Inspection Report in the reports menu is good for showing this data.

Vtube-laser-1.91-report xyz intersection deviation output.png

Other Pages