Horn Machine Tools

From ATTWiki
Revision as of 19:36, 26 June 2015 by Mcone (Talk | contribs)

Jump to: navigation, search
Horn Machine Tools, Inc. is a popular brand of bender in the USA. They sell both Horn benders with BendPro controls and CSM benders from Taiwan.

Hmt logo.png
Hmt bender.png


Distributor of VTube-STEP and Reseller of FARO VTube-LASER systems

HMT is an active distribution partner for our VTube software worldwide. They also actively demonstrate and sell the FARO ScanArm with VTube-LASER system in a special partnership with FARO.

Internationalglobe.jpg

HMT Control software

The HMT operator stations use the BendPro software. The CSM benders use the M3 (older) or M4 (newer) control software.

Unision simulator.jpg

VTube-STEP and VTube-LASER Support for UNISON Benders

VTube-STEP can export Supravision data to UNISON benders.

VTube-STEP also exports special bender data for the UNISON control for bending ribbon shaped stock.

VTube-LASER, the version of VTube that connects to a FARO measuring center arm, can send radius UNISON benders for correction of large radius push bends. The LASER version can also send single bend angles to UNISON benders for large pipe application where correcting the bend angle with the pipe still in the bender.

Unison communications with.jpg
Vtube-laser-sendbendangle.jpg

Contact Information

Unison Ltd
Jim Saynor, Sales Manager
Faroe House,
Thornburgh Road,
Eastfield,
Y011 3UY
Phone: +44 (0) 1723 582868
Fax: +44 (0) 1723 582379
Email: [email protected]

Other Pages