XYZ Data --> XYZ Data

In addition to the XYZ points and bend RADII...

• NEW - Properly skip REFERENCE points in the XYZ data. (Reference points are not intersection or end points. They are not used to define the shape of the tube.)

• NEW - Retain XYZ data as it exists in the FIF file. No longer attempt a recalc from YBC to XYZ. This allows measuring centers to be sure to retain original XYZ MASTER data during conversion.

NEW for Eaton Leonard YBC Data

In addition to the YBC data...

• NEW - Retain YBC data as it exists in the FIF file. No longer attempt a recalc from XYZ to YBC. This allows measuring centers to retain original YBC bender setup data during conversion.

NEW for Eaton Leonard SPEED Data

• NEW - Conversion of YBC axes speeds: 1 - 8

NEW for YBC FUNCTION Data

• NEW - Conversion of all YBC FUNCTION Bits (12345678)

NEW for YBC SPECIAL FUNCTION Data

• NEW - Conversion of all YBC FUNCTION STOP and LAST Bits

NEW Eaton Leonard SETUP Data to SUPRAVISION PROCESS Data

NEW PROCESS VALUES CONVERTED:

• NEW - Default Radius (from first radius level)
• NEW - End A Diameter
• NEW - End B Diameter

NEW Eaton Leonard TOOL Data to SUPRAVISION MACHINE DATA

Handles Up to 9 Radius Levels - EACH LEVEL can contain:

• NEW - Radius
• NEW - Fixed Springback
• NEW - Proportional Springback
• NEW - Clamp Length
• NEW - Clearance Feed
• NEW - Clearance Angle

NEW Eaton Leonard Setup Data to SUPRAVISION MACHINE DATA

• NEW - Ymin
• NEW - Interference Zone 1
• NEW - Interference Zone 2
• NEW - Load Position
• NEW - Load Offset
• NEW - Y Position Tolerance
• NEW - Pressure Die Open Code
• NEW - Boost Delay

NEW Eaton Leonard Extended Setup Data to SUPRAVISION MACHINE DATA

• NEW - Up to 99 EXTENDED setup values are automatically converted