XYZ DATA

In addition to the XYZ points and bend RADII...

• NEW - Properly skip REFERENCE points in the XYZ data. (Reference points are not intersection or end points. They are not used to define the shape of the tube.)

• NEW - Retain XYZ data as it exists in the FIF file. No longer attempt a recalc from YBC to XYZ. This allows measuring centers to be sure to retain original XYZ MASTER data during conversion.

YBC DATA

In addition to the YBC data...

• NEW - Retain YBC data as it exists in the FIF file. No longer attempt a recalc from XYZ to YBC. This allows measuring centers to retain original YBC bender setup data during conversion.

VELOCITY DATA

• NEW - Conversion of YBC axes speeds: 1 - 8

FUNCTION DATA

• NEW - Conversion of all YBC FUNCTION Bits (12345678)

SPECIAL FUNCTION DATA

• NEW - Conversion of all YBC FUNCTION STOP and LAST Bits

PROCESS DATA

NEW PROCESS VALUES CONVERTED:

• NEW - Default Radius (from first radius level)
• NEW - End A Diameter
• NEW - End B Diameter

TOOL DATA

Handles Up to 9 Radius Levels - EACH LEVEL can contain:

• NEW - Radius
• NEW - Fixed Springback
• NEW - Proportional Springback
• NEW - Clamp Length
• NEW - Clearance Feed
• NEW - Clearance Angle

EL Setup Data

• NEW - Ymin
• NEW - Interference Zone 1
• NEW - Interference Zone 2
• NEW - Load Position
• NEW - Load Offset
• NEW - Y Position Tolerance
• NEW - Pressure Die Open Code
• NEW - Boost Delay

EL Extended Setup Data

• NEW - Up to 99 EXTENDED setup values are automatically converted