Difference between revisions of "FARO Version 6 Scanner"

From ATTWiki
Jump to: navigation, search
(Other Pages)
(Other Pages)
Line 37: Line 37:
 
==Other Pages==
 
==Other Pages==
 
* See [[VTube-LASER]] in the knowledgebase
 
* See [[VTube-LASER]] in the knowledgebase
*[http://advancedtubular.com/vtube-laser.htm See] the VTube-LASER web page.<br>
 
*[http://advancedtubular.com/benderlink_faro.htm See] the Benderlink for FARO web page.<br>
 
*[http://www.faro.com/ See] the FARO web site.
 

Revision as of 00:57, 20 August 2015

Farologo.jpg
Faro scanner v6.png



About Laser Stripes

FARO scanners emit what appears to be a laser line that strikes a surface. The line is actually divided into thousands of distinct dots that are then interpreted as surface points at the FARO scanner.

Blue Laser

The version 6 scanner is the first scanner to emit a blue laser. The previous versions emit red lasers.

The Advantages of the Blue Laser Scanner

The blue laser technology is no gimmick. It has important advantages over previous scanners.

Advantage 1: Reduced Spectral Refraction

The v6 scanner takes advantage of the reduced refraction properties of blue laser versus red laser. Every pixel or point of laser on a surface has an inherent amount of spectral refraction that makes the point less precise because the edges of the point can become blurred to the scanners. The v6 blue laser has a less refracted dot (sharper) than previous red laser version dots - making precise detection by the camera much easier than before.

Faro v6 scanner line properties.png

Here are some strong advantages of improved spectral refraction performance:

  • The dots in the stripes are more precise than was previously possible. The dots in the v6 scanner are 0.075 mm apart (0.003").

  • The v6 scanner can return twice as many points in a laser stripe than the previous v5 scanner. It can now return 2000 points per stripe along the full length of the stripe.

  • It has proved to be superior to previous scanners for measuring materials that are black or highly reflective. It can use a new HDR (High Dynamic Range) scanner algorithm designed for use with this scanner to overcome high-contrasting surfaces.

  • It can handle bright factory lighting where previous versions struggled to overcome interference from room lighting. It even overcomes sunlight coming in the bay doors of factories. None of the previous versions could handle nearby sunlight.

Advantage 2: Red Cross-hair Range Finder

Faro v6 scanner images.png
  • The v6 scanner includes a red cross-hair range finder that is aimed at the part surface in order to help the operator find the range more quickly during measuring. Previous scanner versions had no cross-hair range finder.

  • The left-right line of the cross-hair also serves to help quickly center the scanner on a tube straight. Previous versions of scanners could allow users to aim high or low on the tube straights. Finding the center of the beam is much easier with the cross-hair.

Other Pages