Difference between revisions of "Eaton Leonard Lightspeed Communications Setup"
From ATTWiki
(→SVNET Communications Setup) |
(→SVNET Communications Setup) |
||
| Line 41: | Line 41: | ||
* The NAME has no effect on the protocol. However, you can give the setup a name here. | * The NAME has no effect on the protocol. However, you can give the setup a name here. | ||
| − | * Select the | + | * Select the SupraGauge protocol. |
| + | * Set the bender to an integer number that identifies it. This is very important if you have multiple benders that share the same network location for transfer of data files. | ||
Revision as of 15:51, 17 June 2014
|
This document outlines the basic communications setup for a Lightspeed control. |
 |
|
SVNET Communications Setup
|
Change to the Systems menu. If you are not running the operator station as an administrator, then press SECURITY and enter the administrator code. (The default code is "123".) Press the DEVICE CONFIG button. |
|
|
In DEVICE CONFIG, enter the MACHINE menu.
|
|
|
