Copy a default VTube configuration to another computer with VTube

From ATTWiki
Revision as of 03:03, 20 November 2020 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png

Contents


What Is This Feature For?

Reason: Standardization Across All Installations

This feature is helpful for customers that have multiple installations of VTube-LASER or VTube-STEP, and they want to standardize the default configuration for every VTube in the organization.

Reason: Including VTube-LASER Default Values in a VTube-STEP Project Save

This is also useful for when you use VTube-STEP to create files that will be used in VTube-LASER on the factory floor. The challenge in this situation is that VTube-LASER has hundreds of setup variables that VTube-STEP does not have in its user interface. So, how do you configure VTube-STEP so that it saves project files with the correct defaults for VTube-LASER? The answer is to set up the defaults in one of the VTube-LASER computers, then export the setup for import into VTube-STEP on other computers. If you do this, then VTube-STEP will take in and store the VTube-LASER values as they were set up in the VTube-LASER computer. Then, when VTube-STEP saves a project file, it will already have the correct VTube-LASER defaults included in the file to be shared with VTube-LASER.

For VTube Version 3 Build 357 - November 19, 2020

These instructions are for VTube-LASER or VTube-STEP version 3 build 357 or newer only. It was released on November 19th, 2020. See the Advanced Tubular support site for upgrades.

A Warning About The Importance of Version Compatibility

Gear warning.jpg WARNING

The source and target computers should have the same VTube version before copying a configuration to the target computer.


It is safe to copy a configuration from a source VTube computer to a target VTube computer as long as the program versions and build numbers on both computers are identical.

If the versions and builds are not the same, then the VTube target computer may not be able to use the new configuration files.

Click in the top toolbar Information button to check the current version for both VTubes before you copy a configuration.



FIRST Follow These Steps at the SOURCE VTube Computer

STEP 1 - Insert a Flash Drive

If you want to use a flash drive to transfer the configuration from the SOURCE computer, then insert it into the appropriate port on the SOURCE computer now.

Cruzerflashdrive.png

STEP 2 - System Options

Press the System Options button in the SOURCE computer. (The source computer contains the configuration you want to use on other VTube computers.)

Vtube-STEP v2.2 toolbar sys.png

STEP 3 - Press "Export the VTube Configuration"

Press the Project Setup tab, and then press the Export VTube Configuration button.

Vtube v3 projecttab exportdefault.png

STEP 4 - Choose a Location for Save

Choose the location for the exported configuration file and press Save.

VTube will build a filename that has the current date and time embedded in the name so that you know exactly which file to use in configuration imports.

Vtube v3 save exported default.png

STEP 5 - VTube Compresses and Stores to a Single File

VTube will export the configuration files to the one compressed file.

Vtube v3 save exported notification.png

STEP 6 - VTube shows a dialog

VTube will show a dialog when it is finished.

Vtube v3 save exported dialog.png

STEP 7 - Exit System Options

Exit the System Options menu.

Vtube v2.2 systemoptions closemenu.png

STEP 8 - Remove the Flash Drive

If you used a flash drive, then remove it from the SOURCE computer now.

Cruzerflashdrive.png


SECOND Follow These Steps at the TARGET VTube Computer

STEP 1 - Insert the Flash Drive

If you used a flash drive to store the configuration from the SOURCE computer, then insert it into the appropriate port on the TARGET computer now.

Cruzerflashdrive.png

STEP 2 - Save the Project and Press Clear Project

Save your current project (if any) at the TARGET VTube computer. Clear the project by pressing the Clear Project button.

Vtube toolbar clear.png

STEP 3 - Enter System Options

Press the System Options button in the TARGET computer.

Vtube-STEP v2.2 toolbar sys.png

STEP 4 - Press the Import VTube Configuration button

Press the Project Setup tab, and then press the Import VTube Configuration button.

Vtube v3 projecttab importdefault.png

STEP 5 - Explore to the Exported Configuration Backup File

Find the exported configuration file, select it, and press Open.

Vtube v3 open exported default.png

STEP 6 - VTube will Warn You

VTube will warn you with a dialog that the default configurations will be reset in this TARGET computer based on the values from the SOURCE computer if you continue.

Press Continue.

Vtube v3 open exported dialog warning.png

STEP 7 - VTube will show complete

VTube will show a dialog when it is finished importing the configuration.

Vtube v3 open exported dialog complete.png

STEP 8 - VTube will close System Options Automatically

After you press OK, VTube will automatically exit the System Options menu.

The new default setup in the TARGET computer will now be active.

STEP 9 - Remove the Flash Drive

If you used a flash drive, then you can remove it from the TARGET computer now.

Cruzerflashdrive.png


Other Pages